Material: PLA(Poly Lactic Acid )
Density: 1.24g ± 0.05g/cm³meter: 1.75mm
Tensile Strength: 48.5 MPa
Bending Strength: 82.7 MPa
Notch Impack Strength: 16 j/m
Melting Point: 150°C - 165°C
Printing Temperature: 195°C - 220°C (383°F - 428°F)
Material: ABS
Diameter : 1.75MM
Tolerance Level : ± 0.02MM
Print Temperature : 220-240ºC / (428-464ºF)
Print Speed : 50 - 100 mm/s
Base Plate Temperature : Heating Bed Temperature is from 80 to 120 Celsius
Bubble : 100% Zero Bubbles
Length : 330M / 360 Yard
Recommended Storage Temperature : -20 to 50 °C / -4 to 122 °F
